| SECTION QUANTITY | 4 |
| ELECTRICAL RESISTANCE PER SECTION | 10.000 KILOHMS 1ST SECTION |
| 10.000 KILOHMS 2ND SECTION |
| 20.000 KILOHMS 3RD SECTION |
| 20.000 KILOHMS 4TH SECTION |
| RESISTANCE TOLERANCE PER SECTION IN PERCENT | -5.0 TO 5.0 ALL SECTIONS |
| FUNCTION CONFORMITY PER SECTION | 1ST SECTION ABSOLUTE LINEARITY |
| 2ND SECTION ABSOLUTE LINEARITY |
| 3RD SECTION ABSOLUTE LINEARITY |
| 4TH SECTION ABSOLUTE CONFORMITY |
| FUNCTION CHARACTERISTIC PER SECTION | 1ST SECTION LINEAR |
| 2ND SECTION LINEAR |
| 3RD SECTION LINEAR |
| 4TH SECTION GRAPH |
| FUNCTION CONFORMITY TOLERANCE PER SECTION | -0.15 TO 0.15 1ST SECTION |
| -0.30 TO 0.30 2ND SECTION |
| -0.50 TO 0.50 3RD SECTION |
| -0.50 TO 0.50 4TH SECTION |
| SHAFT BEARING TYPE | BALL |
| MAXIMUM STARTING TORQUE | 3.25 INCH-OUNCES |
| MAXIMUM RUNNING TORQUE | 3.00 INCH-OUNCES |
| TEMP COEFFICIENT OF RESISTANCE WIRE PER SECTION IN PPM PER DEG CELSIUS | -20.0 TO 20.0 ALL SECTIONS |
| POWER DISSIPATION RATING PER SECTION IN WATTS | 2.0 FREE AIR ALL SECTIONS |
| AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 85.0 ALL SECTIONS |
| AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 125.0 ALL SECTIONS |
| BODY STYLE | CYLINDRICAL SERVO MOUNTED |
| PILOT DIAMETER | 1.3125 INCHES MAXIMUM |
| PILOT LENGTH | 0.0620 INCHES NOMINAL |
| UNDERCUT DIAMETER | 1.313 INCHES MAXIMUM |
| UNDERCUT WIDTH | 0.0730 INCHES MINIMUM |
| BODY DIAMETER | 1.440 INCHES MAXIMUM |
| BODY LENGTH | 2.300 INCHES MAXIMUM |
| MOUNTING LIP DIAMETER | 1.4370 INCHES NOMINAL |
| MOUNTING LIP DEPTH | 0.0930 INCHES NOMINAL |
| ACTUATOR TYPE | DOUBLE ENDED SHAFT |
| SHAFT STYLE | ROUND, SLOTTED |
| SHAFT DIAMETER | 0.2497 INCHES MAXIMUM |
| SHAFT LENGTH | 0.680 INCHES NOMINAL |
| ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 360.0 NOMINAL |
| ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION |
| EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 345.0 NOMINAL |
| MOUNTING METHOD | CLAMP RING |
| TERMINAL TYPE AND QUANTITY | 12 TURRET |
| TERMINAL LOCATION | RADIALLY POSITIONED OVER MORE THAN HALF THE CIRCUMFERENCE |
| RELIABILITY INDICATOR | NOT ESTABLISHED |
| SPECIAL FEATURES | REAR SLOTTED SHAFT,SHAFT LENGTH 0.250 INCHES MAXIMUM,SHAFT DIAMETER 0.3125 INCHES MAXIMUM |
| TEST DATA DOCUMENT | 10001-2996543 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
| OVERALL LENGTH | 3.250 INCHES MAXIMUM |
| OVERALL DIAMETER | 1.880 INCHES MAXIMUM |
| CUBIC MEASURE | 3.745 CUBIC INCHES |