|
|
|
National Stock Number:
5905-00-441-0629
Federal Supply Class:
5905
National Item Identification Number:
004410629
Description:
RESISTOR,VARIABLE,WIRE WOUND,PRE
Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity) of the output is equal to or less than plus or munus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE, For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, NONWIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND, PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION.
|
Manufacturer Information:
| 195180-1 | 08815 | HONEYWELL INTERNATIONAL INC | | 195180-1 | 37695 | RAYTHEON COMPANY | | AP11C279 | 02297 | ACE ELECTRONICS ASSOCIATES INC | | 741-6131 | 04454 | SENSOR SYSTEMS, L.L.C. | | 741-6131 | 72314 | BAE SYSTEMS INFORMATION AND ELECTRONIC SYSTEMS INTEGRATION INC. |
|
Techincal Specification:
| ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION | | ACTUATOR TYPE | SINGLE SHAFT | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 30.0 ALL SECTIONS | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 71.0 ALL SECTIONS | | BEARING TYPE | BALL SHAFT | | BODY DIAMETER | 1.156 INCHES MAXIMUM | | BODY LENGTH | 1.324 INCHES NOMINAL | | BODY STYLE | CYLINDRICAL SERVO MOUNTED | | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 150.0 NOMINAL | | ELECTRICAL RESISTANCE PER SECTION | 20.000 KILOHMS ALL SECTIONS | | FUNCTION CHARACTERISTIC PER SECTION | ALL SECTIONS EQUATION | | FUNCTION CONFORMITY PER SECTION | ALL SECTIONS ABSOLUTE CONFORMITY | | FUNCTION CONFORMITY TOLERANCE PER SECTION | -0.02 TO 0.02 ALL SECTIONS | | PILOT DIAMETER | 0.96880 INCHES NOMINAL | | PILOT LENGTH | 0.06200 INCHES NOMINAL | | MAXIMUM RUNNING TORQUE | 5.00 INCH-OUNCES | | MAXIMUM STARTING TORQUE | 5.00 INCH-OUNCES | | MECHANICAL BACKLASH IN DEG ANGULAR ROTATION | 10.0 | | MOUNTING LIP DEPTH | 0.06200 INCHES NOMINAL | | MOUNTING LIP DIAMETER | 1.06200 INCHES NOMINAL | | MOUNTING METHOD | CLAMP RING | | POWER DISSIPATION RATING PER SECTION IN WATTS | 2.0 FREE AIR ALL SECTIONS | | RELIABILITY INDICATOR | NOT ESTABLISHED | | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -3.0 TO 3.0 ALL SECTIONS | | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 360.0 NOMINAL | | SECTION QUANTITY | 2 | | SHAFT LENGTH | 0.688 INCHES NOMINAL | | SHAFT DIAMETER | 0.1249 INCHES NOMINAL | | SHAFT END PLAY | 0.00500 INCHES | | SHAFT STYLE | ROUND | | TEMP COEFFICIENT OF RESISTANCE WIRE PER SECTION IN PPM PER DEG CELSIUS | -20.0 TO 20.0 ALL SECTIONS | | TERMINAL LOCATION | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE | | TERMINAL TYPE AND QUANTITY | 10 TURRET | | TEST DATA DOCUMENT | 37695-195180 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) | | UNDERCUT DIAMETER | 1.072 INCHES MAXIMUM | | UNDERCUT WIDTH | 0.06200 INCHES NOMINAL |
|
|