|
|
|
National Stock Number:
5905-00-438-4216
Federal Supply Class:
5905
National Item Identification Number:
004384216
Description:
RESISTOR,FIXED,WIRE WOUND
Detail:
INC 37404 REINSTATED ON 010303~A resistor whose ohmic value cannot be adjusted or varied. The resistance element consists of high resistance wire (or ribbon) either wound on an insulated form or constructed so as to be self-supporting. The items must have inherent characteristics of inducing little or no self-inductance. Opposition to current flow is an inherent property of the resistance wire and is manifested by the heat dissipation in the resistor. Excludes SUPPRESSOR, IGNITION INTERFERENCE. See also RESISTOR (1), FIXED, WIRE WOUND, INDUCTIVE.
|
Manufacturer Information:
| 1017000-142 | 05347 | ULTRONIX INC | | 101A142 | 05347 | ULTRONIX INC | | 900532-142 | 06481 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | 6098-142 | 19587 | KELVIN INDUSTRIES INC | | HR42-142 | 54294 | SHALLCROSS INC | | 1282-142 | 58880 | MEGGITT (NEW HAMPSHIRE), INC | | K532-142 | 19587 | KELVIN INDUSTRIES INC | | SP42W0113-142 | 54294 | SHALLCROSS INC | | R1652-142 | 58880 | MEGGITT (NEW HAMPSHIRE), INC | | WW13-14-142 | 91637 | VISHAY DALE ELECTRONICS, LLC | | WWA13-14-142 | 91637 | VISHAY DALE ELECTRONICS, LLC |
|
Techincal Specification:
| AMBIENT TEMP AT FULL RATED POWER | 125.0 CELSIUS | | AMBIENT TEMP IN DEG CELSIUS AT ZERO PERCENT RATED POWER | 145.0 | | BODY DIAMETER | 0.141 INCHES MAXIMUM | | BODY LENGTH | 0.391 INCHES MAXIMUM | | ELECTRICAL RESISTANCE | 10.250 KILOHMS | | INCLOSURE TYPE | ENCAPSULATED | | POWER DISSIPATION RATING IN WATTS | 0.100 FREE AIR | | RESISTANCE TOLERANCE IN PERCENT | -0.030 TO 0.030 | | RELIABILITY INDICATOR | NOT ESTABLISHED | | STYLE DESIGNATOR | AXIAL TERMINAL EACH END | | TEMP RANGE OF TEMP COEFFICIENT IN DEG CELSIUS | -55.0 TO 125.0 | | TEMP COEFFICIENT OF RESISTANCE IN PPM PER DEG CELSIUS | -10.0 TO 10.0 | | TERMINAL LENGTH | 1.000 INCHES MINIMUM | | TERMINAL TYPE | WIRE LEAD | | TEST DATA DOCUMENT | 06481-900532 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
|
|