| ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION |
| ACTUATOR TYPE | SINGLE SHAFT |
| AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 70.0 ALL SECTIONS |
| AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 125.0 ALL SECTIONS |
| BEARING TYPE | SLEEVE SHAFT |
| BODY DIAMETER | 2.000 INCHES NOMINAL |
| BODY LENGTH | 1.405 INCHES NOMINAL |
| BODY STYLE | CYLINDRICAL BUSHING MOUNTED |
| EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 356.0 NOMINAL |
| ELECTRICAL RESISTANCE PER SECTION | 50.000 KILOHMS ALL SECTIONS |
| FIXED TAP QUANTITY PER SECTION | 1 ALL SECTIONS |
| FUNCTION CHARACTERISTIC PER SECTION | ALL SECTIONS LINEAR |
| FUNCTION CONFORMITY PER SECTION | ALL SECTIONS INDEPENDENT LINEARITY |
| FUNCTION CONFORMITY TOLERANCE PER SECTION | -0.50 TO 0.50 SINGLE SECTION |
| LATERAL RUNOUT | 0.004 INCHES |
| PILOT DIAMETER RUNOUT | 0.00200 INCHES |
| MAXIMUM RUNNING TORQUE | 1.10 INCH-OUNCES |
| MAXIMUM STARTING TORQUE | 1.50 INCH-OUNCES |
| MOUNTING BUSHING LENGTH | 0.375 INCHES NOMINAL |
| MOUNTING METHOD | STANDARD BUSHING |
| NONTURN DEVICE LOCATION | AT 6 OCLOCK |
| NONTURN DEVICE RADIUS | 0.531 INCHES NOMINAL |
| POWER DISSIPATION RATING PER SECTION IN WATTS | 3.5 FREE AIR ALL SECTIONS |
| RELIABILITY INDICATOR | NOT ESTABLISHED |
| RESISTANCE TOLERANCE PER SECTION IN PERCENT | -20.0 TO 20.0 ALL SECTIONS |
| ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 360.0 NOMINAL |
| SCREW THREAD DIAMETER | 0.375 INCHES NOMINAL |
| SCREW THREAD QUANTITY PER INCH | 32.0 |
| SCREW THREAD SERIES DESIGNATOR | UNEF |
| SECTION QUANTITY | 2 |
| SHAFT LENGTH | 0.875 INCHES NOMINAL |
| SHAFT DIAMETER | 0.250 INCHES NOMINAL |
| SHAFT END PLAY | 0.00600 INCHES |
| SHAFT RADIAL PLAY | 0.004 INCHES |
| SHAFT RUNOUT | 0.005 INCHES |
| SHAFT STYLE | ROUND |
| TAP LOCATION FROM CCW TERMINAL PER SECTION IN OHMS | 2500.0 ALL SECTIONS |
| TAP LOCATION TOLERANCE PER SECTION | -1.0 TO 1.0 OHMS ALL SECTIONS |
| TEMP COEFFICIENT OF RESISTANCE WIRE PER SECTION IN PPM PER DEG CELSIUS | -20.0 TO 20.0 ALL SECTIONS |
| TERMINAL LOCATION | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| TERMINAL TYPE AND QUANTITY | 3 SOLDER STUD |