|
|
|
National Stock Number:
5905-00-433-7300
Federal Supply Class:
5905
National Item Identification Number:
004337300
Description:
RESISTOR,FIXED,FILM
Detail:
A resistor whose ohmic value cannot be adjusted or varied. The resistance element consists of either a thin layer of conductive material, containing either binders or insulating materials, deposited on an insulated form; or an alloy of metal and ceramic materials, usually fused to an insulated form. Opposition to the flow of current is an inherent property of the materials used and is manifest by the heat dissipation in the resistor. See also ATTENUATOR, FIXED and RESISTOR, FIXED, COMPOSITION. Excludes carbon composition type resistors.
|
Manufacturer Information:
| 7599055 | 19200 | US ARMY ARDEC RDECOM | | 7602795 | 19200 | US ARMY ARDEC RDECOM | | 9158136-136 | 18876 | U S ARMY AVIATION AND MISSILE COMMAND | | 9158136-136 | 33224 | CENTRAL RESISTOR CORP | | 9158136-136 | 80031 | MEPCO/ELECTRA INC | | C173BN14 | 80031 | MEPCO/ELECTRA INC | | D176176C 15.4 OHMS | 00656 | AEROVOX CORP. | | GA53314A15R4 | 00656 | AEROVOX CORP. | | D176176C 15.4 OHMS | 30983 | MEPCOPAL CO A JOINT VENTURE | | D176176C 15.4 OHMS | 3B4M0 | LUCENT TECHNOLOGIES INC CORPORATE HEADQUARTERS | | D176176C15R4 | 3B4M0 | LUCENT TECHNOLOGIES INC CORPORATE HEADQUARTERS | | GA53314A15R4 | 64959 | AMERICAN TELEPHONE AND TELEGRAPH CO |
|
Techincal Specification:
| TEST DATA DOCUMENT | 18876-9158136 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) | | AMBIENT TEMP AT FULL RATED POWER | 70.0 CELSIUS | | AMBIENT TEMP IN DEG CELSIUS AT ZERO PERCENT RATED POWER | 165.0 | | BODY DIAMETER | 0.250 INCHES NOMINAL | | BODY LENGTH | 0.750 INCHES NOMINAL | | ELECTRICAL RESISTANCE | 15.400 OHMS | | INCLOSURE TYPE | HERMETICALLY SEALED | | POWER DISSIPATION RATING IN WATTS | 0.500 FREE AIR | | RELIABILITY INDICATOR | NOT ESTABLISHED | | RESISTANCE TOLERANCE IN PERCENT | -1.000 TO 1.000 | | STYLE DESIGNATOR | AXIAL TERMINAL EACH END | | TEMP RANGE OF TEMP COEFFICIENT IN DEG CELSIUS | -55.0 TO 165.0 | | TEMP COEFFICIENT OF RESISTANCE IN PPM PER DEG CELSIUS | -500.0 TO 200.0 | | TERMINAL TYPE | WIRE LEAD |
|
|