|
|
|
National Stock Number:
5905-00-430-2923
Federal Supply Class:
5905
National Item Identification Number:
004302923
Description:
RESISTOR,VARIABLE,NONWIRE WOUND,
Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus or minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.
|
Manufacturer Information:
| 11M894 | 01121 | ROCKWELL AUTOMATION, INC. | | 11M894A | 01121 | ROCKWELL AUTOMATION, INC. | | L24346 | 01121 | ROCKWELL AUTOMATION, INC. | | 3450867-1 | 93346 | CAES SYSTEMS LLC |
|
Techincal Specification:
| ACTUATOR TYPE | SINGLE SHAFT | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 70.0 SINGLE SECTION | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 150.0 SINGLE SECTION | | BODY HEIGHT | 0.625 INCHES NOMINAL | | BODY LENGTH | 1.047 INCHES NOMINAL | | BODY STYLE | RECTANGULAR BUSHING MOUNTED | | BODY WIDTH | 0.625 INCHES NOMINAL | | ELECTRICAL RESISTANCE PER SECTION | 2.0 KILOHMS SINGLE SECTION | | FEATURES PROVIDED | SWITCH | | MOUNTING BUSHING LENGTH | 0.375 INCHES NOMINAL | | MOUNTING METHOD | STANDARD BUSHING | | OPERATING POSITION | ANY POSITION OF ROTATIONAL TRAVEL | | POWER DISSIPATION RATING PER SECTION IN WATTS | 2.0 FREE AIR SINGLE SECTION | | RELIABILITY INDICATOR | NOT ESTABLISHED | | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0 TO 10.0 SINGLE SECTION | | SCREW THREAD DIAMETER | 0.375 INCHES NOMINAL | | SCREW THREAD QUANTITY PER INCH | 32.0 | | SCREW THREAD SERIES DESIGNATOR | UNEF | | SECTION QUANTITY | 1 | | SHAFT LENGTH | 0.875 INCHES NOMINAL | | SHAFT DIAMETER | 0.250 INCHES NOMINAL | | SHAFT STYLE | ROUND | | SWITCH TYPE | PUSH-PULL | | SWITCH VOLTAGE RATING IN VOLTS | 125.0 | | SWITCH CONTACT ARRANGEMENT | DOUBLE POLE, SINGLE THROW, NORMALLY OPEN AND DOUBLE POLE, SINGLE THROW, NORMALLY CLOSED | | SWITCH CURRENT TYPE AND RATING IN AMPS | 2.000 AC | | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -250.0 TO 250.0 SINGLE SECTION | | TERMINAL LOCATION | LOWER ADJACENT SIDE FROM ADJUSTABLE CONTROL AND UPPER ADJACENT SIDE FROM ADJUSTABLE CONTROL | | TERMINAL TYPE AND QUANTITY | 11 TAB, SOLDER LUG | | TEST DATA DOCUMENT | 93346-3450867 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
|
|