|
|
|
National Stock Number:
5905-00-428-2646
Federal Supply Class:
5905
National Item Identification Number:
004282646
Description:
RESISTOR,FIXED,FILM
Detail:
A resistor whose ohmic value cannot be adjusted or varied. The resistance element consists of either a thin layer of conductive material, containing either binders or insulating materials, deposited on an insulated form; or an alloy of metal and ceramic materials, usually fused to an insulated form. Opposition to the flow of current is an inherent property of the materials used and is manifest by the heat dissipation in the resistor. See also ATTENUATOR, FIXED and RESISTOR, FIXED, COMPOSITION. Excludes carbon composition type resistors.
|
Manufacturer Information:
| 22-190006 | 11359 | ADAGE INC | | 300881 | 18612 | VISHAY INTERTECHNOLOGY, INC. | | 3020432-1002 | 10001 | NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER | | C302-10001T | 18612 | VISHAY INTERTECHNOLOGY, INC. | | C302-10KP0RM0-01PCT | 18612 | VISHAY INTERTECHNOLOGY, INC. | | 3020432-1001 | 53711 | NAVAL SEA SYSTEMS COMMAND | | C302-10KPORM0-01PCT | 18612 | VISHAY INTERTECHNOLOGY, INC. | | MDE473KB2A | 72136 | ELECTRO MOTIVE CORP SUBSIDIARY OF INTERNATIONAL ELECTRONICS CORP |
|
Techincal Specification:
| AMBIENT TEMP AT FULL RATED POWER | 125.0 CELSIUS | | AMBIENT TEMP IN DEG CELSIUS AT ZERO PERCENT RATED POWER | 175.0 | | BODY DIAMETER | 0.275 INCHES NOMINAL | | BODY LENGTH | 0.510 INCHES NOMINAL | | ELECTRICAL RESISTANCE | 10.000 KILOHMS | | INCLOSURE TYPE | ENCAPSULATED | | POWER DISSIPATION RATING IN WATTS | 0.300 FREE AIR | | RESISTANCE TOLERANCE IN PERCENT | -0.010 TO 0.010 | | RELIABILITY INDICATOR | NOT ESTABLISHED | | STYLE DESIGNATOR | AXIAL TERMINAL EACH END | | TEMP RANGE OF TEMP COEFFICIENT IN DEG CELSIUS | -55.0 TO 175.0 | | TEMP COEFFICIENT OF RESISTANCE IN PPM PER DEG CELSIUS | -5.0 TO 5.0 | | TERMINAL TYPE | WIRE LEAD | | TEST DATA DOCUMENT | 10001-3020432 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
|
|