| ACTUATOR TYPE | SINGLE SHAFT |
| ACTUATOR TRAVEL CONTROL FEATURE | STOPS |
| AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 40.0 SINGLE SECTION |
| BEARING TYPE | BALL SHAFT |
| BODY DIAMETER | 0.875 INCHES NOMINAL |
| BODY LENGTH | 1.500 INCHES NOMINAL |
| BODY STYLE | CYLINDRICAL SERVO MOUNTED |
| EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 3600.0 NOMINAL |
| ELECTRICAL RESISTANCE PER SECTION | 1.0 KILOHMS SINGLE SECTION |
| FIXED TAP QUANTITY PER SECTION | 3 SINGLE SECTION |
| FUNCTION CHARACTERISTIC PER SECTION | SINGLE SECTION LINEAR |
| FUNCTION CONFORMITY PER SECTION | SINGLE SECTION INDEPENDENT LINEARITY |
| FUNCTION CONFORMITY TOLERANCE PER SECTION | -0.075 TO 0.075 SINGLE SECTION |
| MAXIMUM RUNNING TORQUE | 0.60 INCH-OUNCES |
| MAXIMUM STARTING TORQUE | 0.90 INCH-OUNCES |
| MAXIMUM STOP TORQUE | 100.00 INCH-OUNCES |
| PILOT LENGTH | 0.0620 INCHES NOMINAL |
| PILOT DIAMETER | 0.7500 INCHES NOMINAL |
| POWER DISSIPATION RATING PER SECTION IN WATTS | 2.0 FREE AIR SINGLE SECTION |
| MOUNTING LIP DEPTH | 0.0620 INCHES NOMINAL |
| MOUNTING LIP DIAMETER | 0.8750 INCHES NOMINAL |
| MOUNTING METHOD | CLAMP RING(S) |
| OVERALL DIAMETER | 1.070 INCHES NOMINAL |
| OVERALL LENGTH | 2.030 INCHES NOMINAL |
| RESISTANCE TOLERANCE PER SECTION IN PERCENT | -5.0 TO 5.0 SINGLE SECTION |
| RELIABILITY INDICATOR | NOT ESTABLISHED |
| ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 3602.0 NOMINAL AND 3606.0 MAXIMUM |
| SECTION QUANTITY | 1 |
| SHAFT DIAMETER | 0.1248 INCHES NOMINAL |
| SHAFT LENGTH | 0.500 INCHES NOMINAL |
| SHAFT END PLAY | 0.002 INCHES |
| SHAFT RADIAL PLAY | 0.001 INCHES |
| SHAFT RUNOUT | 0.001 INCHES |
| SHAFT STYLE | ROUND |
| SPECIAL FEATURES | REAR 0.62 IN. BY 0.62 IN. SLOTTED SHAFT FLUSH WITH CASE |
| TAP LOCATION FROM CCW TERMINAL PER SECTION IN DEG OF EFFECTIVE ELECTRICAL ROTATION | 344.3 1ST SECTION AND 1800.0 2ND SECTION AND 3255.7 3RD SECTION |
| TAP LOCATION TOLERANCE PER SECTION | -0.25 TO 0.25 OHMS 1ST SECTION AND -1.0 TO 0.1 OHMS 2ND SECTION AND -0.25 TO 0.25 OHMS 3RD SECTION |
| TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -70.0 TO 70.0 SINGLE SECTION |
| TERMINAL LOCATION | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| TERMINAL TYPE AND QUANTITY | 6 TURRET |
| TEST DATA DOCUMENT | 18876-10243513 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
| UNDERCUT WIDTH | 0.0570 INCHES MINIMUM |
| UNDERCUT DIAMETER | 0.750 INCHES NOMINAL |