|
|
|
National Stock Number:
5905-00-425-8283
Federal Supply Class:
5905
National Item Identification Number:
004258283
Description:
RESISTOR,VARIABLE,WIRE WOUND,NON
Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus of minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, NONWIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND, PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.
|
Manufacturer Information:
| 6211-4075-001 | 33827 | BAE SYSTEMS INTEGRATED DEFENSE SOLUTIONS INC. | | 6211-4075-001 | K0656 | BAE SYSTEMS (OPERATIONS) LIMITED |
|
Techincal Specification:
| ACTUATOR TYPE | SINGLE SHAFT | | BODY HEIGHT | 0.375 INCHES NOMINAL | | BODY LENGTH | 0.375 INCHES NOMINAL | | BODY STYLE | RECTANGULAR W/MOUNTING HOLES/SLOTS | | BODY WIDTH | 0.145 INCHES NOMINAL | | CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL | 0.100 INCHES NOMINAL | | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | 0.200 INCHES NOMINAL | | CENTER TO CENTER DISTANCE BETWEEN TERMINAL ROWS | 0.100 INCHES NOMINAL | | ELECTRICAL RESISTANCE PER SECTION | 100.0 OHMS SINGLE SECTION | | FEATURES PROVIDED | NONMETALLIC SHAFT | | LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS | 0.419 INCHES NOMINAL | | POWER DISSIPATION RATING PER SECTION IN WATTS | 1.0 FREE AIR SINGLE SECTION | | MOUNTING FACILITY QUANTITY | 1 | | MOUNTING HOLE DIAMETER | 0.074 INCHES NOMINAL | | MOUNTING SLOT WIDTH | 0.074 INCHES NOMINAL | | MOUNTING METHOD | SLOT AND UNTHREADED HOLE(S) | | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -5.0 TO 5.0 SINGLE SECTION | | RELIABILITY INDICATOR | NOT ESTABLISHED | | SECTION QUANTITY | 1 | | SHAFT DIAMETER | 0.055 INCHES MINIMUM AND 0.065 INCHES MAXIMUM | | SHAFT LENGTH | 0.040 INCHES NOMINAL | | SHAFT STYLE | ROUND, SLOTTED | | TERMINAL LENGTH | 0.177 INCHES MINIMUM AND 0.197 INCHES MAXIMUM | | TERMINAL LOCATION | RIGHT ADJACENT SIDE TWO ROWS | | TERMINAL TYPE AND QUANTITY | 3 PIN | | TEST DATA DOCUMENT | 27489-6211-4075-001 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
|
|