|
|
|
National Stock Number:
5365-00-520-1835
Federal Supply Class:
5365
National Item Identification Number:
005201835
Description:
SHIM
Detail:
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use DISK, SOLID, PLAIN. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see SPACER, PLATE; WASHER, FLAT and SPACER, RING. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also SHIM STOCK, LAMINATED; SHIM STOCK ASSORTMENT, GASKET; and BEARING, WASHER, THRUST.
|
Manufacturer Information:
|
Techincal Specification:
| CONSTRUCTION | ONE-PIECE | | OVERALL LENGTH | 0.500 INCHES NOMINAL | | OVERALL WIDTH | 0.500 INCHES NOMINAL | | MATERIAL | COPPER ALLOY 268 OR COPPER ALLOY 260 OR COPPER ALLOY 240 OR COPPER ALLOY 230 OR COPPER ALLOY 377 OR COPPER ALLOY 360 OR COPPER ALLOY 342 OR COPPER ALLOY 353 OR COPPER ALLOY 262 OR COPPER ALLOY 270 OR COPPER ALLOY 272 OR COPPER ALLOY 274 OR COPPER ALLOY 280 OR COPPER ALLOY 330 OR COPPER ALLOY 331 OR COPPER ALLOY 332 OR COPPER ALLOY 335 OR COPPER ALLOY 340 OR COPPER ALLOY 344 OR COPPER ALLOY 345 OR COPPER ALLOY 347 OR COPPER ALLOY 348 OR COPPER ALLOY 350 OR COPPER ALLOY 356 OR COPPER ALLOY 370 OR COPPER ALLOY 462 OR COPPER ALLOY 464 OR COPPER ALLOY 465 OR COPPER ALLOY 466 OR COPPER ALLOY 467 OR COPPER ALLOY 482 OR COPPER ALLOY 485 | | SPECIAL FEATURES | ONE SLOT 0.407 IN. DEEP,0.187 IN. MIN AND 0.197 IN. MAX WIDE | | STYLE DESIGNATOR | SQUARE |
|
|