|
|
|
National Stock Number:
5365-00-514-2758
Federal Supply Class:
5365
National Item Identification Number:
005142758
Description:
SHIM
Detail:
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use DISK, SOLID, PLAIN. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see SPACER, PLATE; WASHER, FLAT and SPACER, RING. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also SHIM STOCK, LAMINATED; SHIM STOCK ASSORTMENT, GASKET; and BEARING, WASHER, THRUST.
|
Manufacturer Information:
| 510670PC4 | 10001 | NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER | | 510670PC4 | 53711 | NAVAL SEA SYSTEMS COMMAND | | MILS22499 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| APERTURE DIAMETER | 2.440 INCHES MINIMUM AND 2.460 INCHES MAXIMUM | | BOLT HOLE QUANTITY | 4 | | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 2.190 INCHES MINIMUM AND 2.210 INCHES MAXIMUM | | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | 2.190 INCHES MINIMUM AND 2.210 INCHES MAXIMUM | | CONSTRUCTION | LAMINATED | | DEPARTURE FROM CITED DESIGNATOR | QUDE | | FEATURES PROVIDED | SEPARABLE | | HOLE DIAMETER | 0.406 INCHES NOMINAL | | LAMINATION THICKNESS | 0.002 INCHES NOMINAL | | OUTSIDE CORNER RADIUS | 0.400 INCHES NOMINAL | | OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH | 0.390 INCHES MINIMUM AND 0.410 INCHES MAXIMUM | | OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH | 0.390 INCHES MINIMUM AND 0.410 INCHES MAXIMUM | | OVERALL LENGTH | 2.080 INCHES MINIMUM AND 3.020 INCHES MAXIMUM | | OVERALL WIDTH | 2.080 INCHES MINIMUM AND 3.020 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-B-613,1/4H FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | COPPER ALLOY 260 | | NONDEFINITIVE SPEC/STD DATA | 2 COMPOSITION AND 1 TYPE AND 1 CLASS | | STYLE DESIGNATOR | NON-CIRCULAR W/BOLT HOLES |
|
|