|
|
|
National Stock Number:
5365-00-492-8805
Federal Supply Class:
5365
National Item Identification Number:
004928805
Description:
SPACER,PLATE
Detail:
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.
|
Manufacturer Information:
| 80R12-1-1AA | 71286 | HOWMET GLOBAL FASTENING SYSTEMS INC |
|
Techincal Specification:
| APERTURE DIAMETER | 0.414 INCHES MINIMUM AND 0.422 INCHES MAXIMUM | | BOLT CIRCLE DIAMETER | 0.871 INCHES MINIMUM AND 0.879 INCHES MAXIMUM | | BOLT HOLE QUANTITY | 2 | | HOLE DIAMETER | 0.097 INCHES MINIMUM AND 0.102 INCHES MAXIMUM | | OUTSIDE CORNER RADIUS | 0.120 INCHES NOMINAL | | OVERALL WIDTH | 1.135 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-25-/4 FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | ALUMINUM ALLOY 2024 | | SIDE RADIUS FROM GASKET CENTER | 0.300 INCHES NOMINAL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-5541 MIL SPEC SINGLE TREATMENT RESPONSE | | SURFACE TREATMENT | CHROMATE |
|
|