|
|
|
National Stock Number:
5365-00-482-7223
Federal Supply Class:
5365
National Item Identification Number:
004827223
Description:
SPACER,PLATE
Detail:
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.
|
Manufacturer Information:
| 532602 | 09594 | NEWELL WINDOW FURNISHINGS CO | | 532602 | 11449 | TURBO POWER & MARINE SYSTEM INC SUB OF UNITED TECHNOLOGIES CORP | | 532602 | 21128 | JDMC ENTERPRISES DBA HIGH SPEED MACHINE PRODUCTS | | 532602 | 77445 | RTX CORPORATION |
|
Techincal Specification:
| APERTURE DIAMETER | 0.185 INCHES MINIMUM AND 0.186 INCHES MAXIMUM | | CRITICALITY CODE JUSTIFICATION | FEAT | | OUTSIDE CORNER BEVEL LENGTH ALONG LENGTH | 0.045 INCHES NOMINAL | | OUTSIDE CORNER BEVEL LENGTH ALONG WIDTH | 0.045 INCHES NOMINAL | | OVERALL LENGTH | 0.265 INCHES MINIMUM AND 0.275 INCHES MAXIMUM | | OVERALL WIDTH | 0.265 INCHES MINIMUM AND 0.275 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5613 ASSN STD SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL | | SPECIAL FEATURES | CRITICAL FEATURES, TOLERANCES, FIT RESTRICTIONS, MATERIAL PROPERTIES AND MANUFACTURING PROCESS. FAILURE COULD RESULT IN LOSS OR SUBSTANTIAL DAMAGE TO WEAPON SYSTEM, DEATH OR SERIOUS INJURY. | | STYLE DESIGNATOR | NON-CIRCULAR W/O BOLT HOLES |
|
|