|
|
|
National Stock Number:
5365-00-480-6750
Federal Supply Class:
5365
National Item Identification Number:
004806750
Description:
SHIM
Detail:
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use DISK, SOLID, PLAIN. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see SPACER, PLATE; WASHER, FLAT and SPACER, RING. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also SHIM STOCK, LAMINATED; SHIM STOCK ASSORTMENT, GASKET; and BEARING, WASHER, THRUST.
|
Manufacturer Information:
| 603B737H01 | 48306 | NORTHROP GRUMMAN SUPPORT SERVICES CORP | | 603B737H01 | 97942 | NORTHROP GRUMMAN SYSTEMS CORPORATION |
|
Techincal Specification:
| APERTURE DIAMETER | 0.623 INCHES MINIMUM AND 0.630 INCHES MAXIMUM | | BOLT HOLE QUANTITY | 2 | | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 1.750 INCHES NOMINAL | | CONSTRUCTION | LAMINATED | | FEATURES PROVIDED | NONSEPARABLE | | HOLE DIAMETER | 0.178 INCHES MINIMUM AND 0.183 INCHES MAXIMUM | | LAMINATION QUANTITY | 31 | | LAMINATION THICKNESS | 0.003 INCHES NOMINAL | | OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH | 0.250 INCHES NOMINAL | | OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH | 0.620 INCHES NOMINAL | | OVERALL LENGTH | 2.250 INCHES NOMINAL | | OVERALL WIDTH | 1.250 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-318 FED SPEC 1ST MATERIAL RESPONSE OR QQ-A-561 FED SPEC 2ND MATERIAL RESPONSE | | MATERIAL | ALUMINUM ALLOY 5052 OR ALUMINUM ALLOY 1100 |
|
|