5365-00-458-0959, SPACER,PLATE

National Stock Number:
5365-00-458-0959

Federal Supply Class:
5365

National Item Identification Number:
004580959

Description:
SPACER,PLATE

Detail:
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.

Manufacturer Information:

4F19046-103A

98897

LOCKHEED MARTIN CORP

Techincal Specification:

BOLT HOLE QUANTITY	2
BOLT HOLE CENTERLINE TO NEAREST EDGE DISTANCE	0.310 INCHES NOMINAL
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH	1.240 INCHES MINIMUM AND 1.260 INCHES MAXIMUM
HOLE DIAMETER	0.195 INCHES MINIMUM AND 0.201 INCHES MAXIMUM
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH	0.505 INCHES NOMINAL
OVERALL LENGTH	2.220 INCHES MINIMUM AND 2.280 INCHES MAXIMUM
OVERALL WIDTH	0.590 INCHES MINIMUM AND 0.650 INCHES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATION	MIL-S-25043,17-7PH,ANNEALED MIL SPEC SINGLE MATERIAL RESPONSE
MATERIAL	STEEL CORROSION RESISTING
OUTSIDE CORNER BEVEL LENGTH ALONG LENGTH	0.220 INCHES MINIMUM AND 0.280 INCHES MAXIMUM
OUTSIDE CORNER BEVEL LENGTH ALONG WIDTH	0.220 INCHES MINIMUM AND 0.280 INCHES MAXIMUM
SPECIAL FEATURES	BOLT HOLES COUNTERSUNK ON ONE SIDE,0.396 IN. NOM. DIA BY 100.0 DEG; 2 OPPOSITE OUTSIDE CORNER BEVELS CHAMFERED,0.090 IN. DEEP AND 30.0 DEG
STYLE DESIGNATOR	NON-CIRCULAR W/BEVELED CORNERS

Click here to Register for Free 30-day Trial