|
|
|
National Stock Number:
5365-00-451-9623
Federal Supply Class:
5365
National Item Identification Number:
004519623
Description:
SHIM
Detail:
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use DISK, SOLID, PLAIN. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see SPACER, PLATE; WASHER, FLAT and SPACER, RING. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also SHIM STOCK, LAMINATED; SHIM STOCK ASSORTMENT, GASKET; and BEARING, WASHER, THRUST.
|
Manufacturer Information:
| 94849 | 11599 | TRIUMPH ENGINE CONTROL SYSTEMS LLC |
|
Techincal Specification:
| APERTURE DIAMETER | 0.127 INCHES MINIMUM AND 0.132 INCHES MAXIMUM | | CONSTRUCTION | ONE-PIECE | | GASKET CENTER TO FLAT DISTANCE | 0.149 INCHES NOMINAL | | GASKET CENTER TO SECOND FLAT DISTANCE | 0.149 INCHES NOMINAL | | OUTSIDE DIAMETER | 0.690 INCHES MINIMUM AND 0.700 INCHES MAXIMUM |
|
|