|
|
|
National Stock Number:
5365-00-449-6092
Federal Supply Class:
5365
National Item Identification Number:
004496092
Description:
SPACER,PLATE
Detail:
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.
|
Manufacturer Information:
| 364164-1 | 99193 | HONEYWELL INTERNATIONAL INC. |
|
Techincal Specification:
| APERTURE DIAMETER | 0.260 INCHES MINIMUM AND 0.270 INCHES MAXIMUM | | BOLT CIRCLE DIAMETER | 1.280 INCHES NOMINAL | | BOLT HOLE QUANTITY | 3 | | HOLE DIAMETER | 0.195 INCHES MINIMUM AND 0.205 INCHES MAXIMUM | | OVERALL WIDTH | 1.511 INCHES MINIMUM AND 1.571 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-591,ALLOY A380 FED SPEC SINGLE MATERIAL RESPONSE | | OUTSIDE CORNER INVERTED RADIUS | 0.100 INCHES NOMINAL | | OUTSIDE CORNER RADIUS | 0.180 INCHES MINIMUM AND 0.210 INCHES MAXIMUM | | SIDE RADIUS FROM GASKET CENTER | 1.180 INCHES MINIMUM AND 1.220 INCHES MAXIMUM | | SPECIAL FEATURES | COUNTERBORE,0.970 TO 1.000 IN. DIA AND 0.140 TO 0.160 IN. DEEP. ALSO,THERE IS A HOLE,0.055 TO 0.065 IN. DIA.FROM THE FLAT FACE THROUGH TO THE COUNTERBORE. | | STYLE DESIGNATOR | NON-CIRCULAR W/APERTURE | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-S-5541 MIL SPEC SINGLE TREATMENT RESPONSE | | SURFACE TREATMENT | CHROMATE |
|
|