5365-00-446-6387 SHIM Index 1560-00-446-6389 FITTING,GREASE

National Stock Number:
5365-00-446-6388

Federal Supply Class:
5365

National Item Identification Number:
004466388

Description:
SHIM

Detail:
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use DISK, SOLID, PLAIN. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see SPACER, PLATE; WASHER, FLAT and SPACER, RING. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also SHIM STOCK, LAMINATED; SHIM STOCK ASSORTMENT, GASKET; and BEARING, WASHER, THRUST.


Manufacturer Information:
204-011-444-00197499BELL TEXTRON INC
204-011-444-197499BELL TEXTRON INC


Techincal Specification:
BOLT HOLE QUANTITY3
CONSTRUCTIONLAMINATED
FEATURES PROVIDEDNONSEPARABLE
HOLE DIAMETER0.280 INCHES MINIMUM AND 0.287 INCHES MAXIMUM
LAMINATION QUANTITY20
LAMINATION THICKNESS0.003 INCHES NOMINAL
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-A-148 MIL SPEC SINGLE MATERIAL RESPONSE
MATERIALALUMINUM ALLOY 1100
SPECIAL FEATURESEDGE BONDED AT 8 PLACES,5.300 IN. INNER ARC RADIUS,5.820 IN. OUTER ARC RADIUS


Click here to Register for Free 30-day Trial