|
|
|
National Stock Number:
5365-00-438-9215
Federal Supply Class:
5365
National Item Identification Number:
004389215
Description:
SPACER,PLATE
Detail:
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.
|
Manufacturer Information:
| 1942507-4 | 19315 | HONEYWELL INTL INC DEFENSE AVIONICS SYSTEMS FORMER BENDIX NAVIGATION AND CONTROL SYSTEMS | | 1942507-4 | 55974 | HONEYWELL INTL INC DEFENSE AVIONICS SYSTEMS FORMER TEST SYSTEMS DIV | | R102-282 | 18677 | SCANBE MFG CO DIV OF ZERO CORP |
|
Techincal Specification:
| APERTURE WIDTH | 0.255 INCHES MINIMUM AND 0.265 INCHES MAXIMUM | | APERTURE LENGTH | 0.501 INCHES MINIMUM AND 0.511 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-M-20693,WHITE MIL SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | PLASTIC | | OUTSIDE CORNER RADIUS | 0.125 INCHES NOMINAL | | OVERALL LENGTH | 0.755 INCHES MINIMUM AND 0.785 INCHES MAXIMUM | | OVERALL WIDTH | 0.453 INCHES MINIMUM AND 0.463 INCHES MAXIMUM | | SPECIAL FEATURES | THE APERTURE IS NOT CENTERED ON THE WIDTH DIMENSION,ON ONE SIDE,IT IS 0.073 IN. FROM THE EDGE. THE CORNERS OF THE APERTURE ARE ROUNDED. |
|
|