|
|
|
National Stock Number:
5365-00-432-8360
Federal Supply Class:
5365
National Item Identification Number:
004328360
Description:
SHIM
Detail:
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use DISK, SOLID, PLAIN. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see SPACER, PLATE; WASHER, FLAT and SPACER, RING. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also SHIM STOCK, LAMINATED; SHIM STOCK ASSORTMENT, GASKET; and BEARING, WASHER, THRUST.
|
Manufacturer Information:
| 2013867P2 | 10001 | NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER |
|
Techincal Specification:
| BOLT HOLE QUANTITY | 3 | | BOLT HOLE CENTERLINE TO NEAREST EDGE DISTANCE | 0.500 INCHES NOMINAL | | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 2.495 INCHES MINIMUM AND 2.505 INCHES MAXIMUM | | CONSTRUCTION | LAMINATED | | FEATURES PROVIDED | SEPARABLE | | HOLE DIAMETER | 0.182 INCHES MINIMUM AND 0.190 INCHES MAXIMUM | | LAMINATION QUANTITY | 52 | | LAMINATION THICKNESS | 0.003 INCHES NOMINAL | | OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH | 0.250 INCHES NOMINAL | | OVERALL LENGTH | 2.980 INCHES MINIMUM AND 3.020 INCHES MAXIMUM | | OVERALL WIDTH | 0.980 INCHES MINIMUM AND 1.020 INCHES MAXIMUM | | MATERIAL | ALUMINUM ALLOY B850.0 | | OUTSIDE CORNER BEVEL LENGTH ALONG LENGTH | 0.380 INCHES NOMINAL | | OUTSIDE CORNER BEVEL LENGTH ALONG WIDTH | 0.380 INCHES NOMINAL | | SPECIAL FEATURES | TWO HOLES 0.182 IN. MIN AND 0.190 IN. MAX DIA,COUNTERSUNK 81 DEGREES,ONE CTR HOLE 0.560 IN. MIN AND 0.570 IN. MAX,CTR TO CTR DISTANCE BTW BOLT HOLES IS 2.500 | | STYLE DESIGNATOR | NON-CIRCULAR W/SQUARE CORNERS |
|
|