|
|
|
National Stock Number:
5365-00-432-3490
Federal Supply Class:
5365
National Item Identification Number:
004323490
Description:
SHIM
Detail:
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use DISK, SOLID, PLAIN. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see SPACER, PLATE; WASHER, FLAT and SPACER, RING. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also SHIM STOCK, LAMINATED; SHIM STOCK ASSORTMENT, GASKET; and BEARING, WASHER, THRUST.
|
Manufacturer Information:
| 32-P19509B001 | 1VPW8 | GENERAL DYNAMICS MISSION SYSTEMS, INC. | | 32-P19509B001 | 94990 | MOTOROLA INC. DBA INTEGRATED INFORMATION SYSTEMS GROUP | | 32P19509B001 | 94990 | MOTOROLA INC. DBA INTEGRATED INFORMATION SYSTEMS GROUP |
|
Techincal Specification:
| BOLT HOLE QUANTITY | 4 | | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | 1.040 INCHES NOMINAL | | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 1.040 INCHES NOMINAL | | CONSTRUCTION | ONE-PIECE | | HOLE DIAMETER | 0.156 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-C-576 FED SPEC ALL MATERIAL RESPONSES | | MATERIAL | COPPER ALLOY 102 OR COPPER ALLOY 104 OR COPPER ALLOY 105 OR COPPER ALLOY 107 OR COPPER ALLOY 110 OR COPPER ALLOY 113 OR COPPER ALLOY 114 OR COPPER ALLOY 120 OR COPPER ALLOY 121 OR COPPER ALLOY 122 OR COPPER ALLOY 123 OR COPPER ALLOY 125 OR COPPER ALLOY 128 | | OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH | 0.105 INCHES NOMINAL | | OVERALL LENGTH | 2.120 INCHES NOMINAL | | OVERALL WIDTH | 1.250 INCHES NOMINAL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-S-365,TY 2 FED SPEC SINGLE TREATMENT RESPONSE | | SURFACE TREATMENT | SILVER |
|
|