| FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG CORNER RADIUS | 5.0 MILLIMETERS NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 25.4 MILLIMETERS NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 9.3 MILLIMETERS NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 25.0 MILLIMETERS NOMINAL |
| FIRST LEG STYLE | CORNER RADIUS |
| FIRST LEG THICKNESS | 4.8 MILLIMETERS NOMINAL |
| FIRST LEG HOLE DIAMETER | 12.4 MILLIMETERS NOMINAL |
| FIRST LEG LENGTH | 41.0 MILLIMETERS NOMINAL |
| FIRST LEG WIDTH | 50.8 MILLIMETERS NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A1011/A1011M ASSN STD SINGLE MATERIAL RESPONSE |
| MATERIAL | STEEL |
| MOUNTING HOLE TYPE | PLAIN |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | BRACKET, MOUNTING, SWITCH, DUMP BED DOWN |
| SECOND LEG CORNER RADIUS | 5.0 MILLIMETERS NOMINAL |
| SECOND LEG HOLE ARRANGEMENT STYLE | 2 SLOTS |
| SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 25.4 MILLIMETERS NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 25.0 MILLIMETERS NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 12.7 MILLIMETERS NOMINAL |
| SECOND LEG THICKNESS | 4.8 MILLIMETERS NOMINAL |
| SECOND LEG WIDTH | 50.8 MILLIMETERS NOMINAL |
| SECOND LEG LENGTH | 41.0 MILLIMETERS NOMINAL |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG SLOT LENGTH | 14.3 MILLIMETERS NOMINAL |
| SECOND LEG SLOT WIDTH | 6.4 MILLIMETERS NOMINAL |
| SECOND LEG STYLE | CORNER RADIUS |
| SPECIAL FEATURES | SECOND HOLE ON FIRST LEG HAS DIAMETER OF 3.7 MM |
| STYLE DESIGNATOR | ANGLE |