|
|
|
National Stock Number:
5340-01-193-4588
Federal Supply Class:
5340
National Item Identification Number:
011934588
Description:
HINGE,BUTT
Detail:
A hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
|
Manufacturer Information:
| A-A-5587-4 | 58536 | FEDERAL COMMERCIAL ITEM DESCRIPTION PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC | | FF-H-116 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MS27968-4 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| BODY WIDTH | 2.440 INCHES MINIMUM AND 2.560 INCHES MAXIMUM | | HINGE MOUNTING TYPE | FULL SURFACE | | KNUCKLE QUANTITY | 5 | | KNUCKLE TYPE | FRICTION | | MATERIAL THICKNESS | 0.084 INCHES MINIMUM AND 0.094 INCHES MAXIMUM | | MATERIAL | COPPER ALLOY 260 OR COPPER ALLOY 262 OR COPPER ALLOY 268 OR COPPER ALLOY 270 OR COPPER ALLOY 272 OR COPPER ALLOY 274 OR COPPER ALLOY 280 OR COPPER ALLOY 330 OR COPPER ALLOY 331 OR COPPER ALLOY 332 OR COPPER ALLOY 335 OR COPPER ALLOY 340 OR COPPER ALLOY 342 OR COPPER ALLOY 344 OR COPPER ALLOY 345 OR COPPER ALLOY 347 OR COPPER ALLOY 348 OR COPPER ALLOY 350 OR COPPER ALLOY 353 OR COPPER ALLOY 356 OR COPPER ALLOY 360 OR COPPER ALLOY 370 OR COPPER ALLOY 462 OR COPPER ALLOY 464 OR COPPER ALLOY 465 OR COPPER ALLOY 466 OR COPPER ALLOY 467 OR COPPER ALLOY 482 OR COPPER ALLOY 485 OR STEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 304 PIN | | MOUNTING HOLE DIAMETER | 0.169 INCHES NOMINAL | | MOUNTING HOLE QUANTITY | 6 | | NONDEFINITIVE SPEC/STD DATA | 2171H TYPE | | PERFORMANCE TYPE | NOT RATED | | PIN CENTER TO BODY EDGE DISTANCE | 1.250 INCHES NOMINAL | | PIN REMOVABILITY | NONREMOVABLE | | REVERSIBLE FEATURE | NOT INCLUDED | | SPECIAL FEATURES | MATERIAL AND LOCATION = STEEL,FED STD 66,LOW CARBON,BODY | | STYLE DESIGNATOR | BUTT | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | ASTM B633,TYPE 2, CLASS 2 ASSN STD SINGLE TREATMENT RESPONSE BODY | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE2,CLASS2 FED SPEC 1ST TREATMENT RESPONSE AND MIL-C-81562, TYPE 2, CLASS 2 MIL SPEC 2ND TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | ZINC AND CHROMATE ZINC OVERALL |
|
|