|
|
|
National Stock Number:
5340-00-553-3932
Federal Supply Class:
5340
National Item Identification Number:
005533932
Description:
BRACKET,ANGLE
Detail:
A ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
|
Manufacturer Information:
| 65C35625-7 | 18894 | AIR ARMAMENT CENTER/ EN | | 65C35625-7 | 98750 | SAN ANTONIO AIR LOGISTICS CENTER |
|
Techincal Specification:
| FIRST LEG ANGLE | 90.0 DEGREES NOMINAL | | FIRST LEG HOLE DIAMETER | 0.405 INCHES MINIMUM AND 0.412 INCHES MAXIMUM | | FIRST LEG THICKNESS | 0.125 INCHES NOMINAL | | FIRST LEG WIDTH | 5.750 INCHES NOMINAL | | FIRST LEG LENGTH | 1.500 INCHES NOMINAL | | HEAT TREATMENT | COLD WORKED | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-698 FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL | | SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 5.250 INCHES NOMINAL | | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.500 INCHES NOMINAL | | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.250 INCHES NOMINAL | | SECOND LEG LENGTH | 2.125 INCHES NOMINAL | | SECOND LEG STYLE | SQUARE | | SECOND LEG HOLE ARRANGEMENT STYLE | TWO HOLES | | SECOND LEG HOLE DIAMETER | 0.280 INCHES MINIMUM AND 0.287 INCHES MAXIMUM | | SECOND LEG THICKNESS | 0.125 INCHES NOMINAL | | SECOND LEG WIDTH | 5.750 INCHES NOMINAL | | STYLE DESIGNATOR | ANGLE | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,T-2,CL-1 FED SPEC 1ST TREATMENT RESPONSE OR MIL-STD-808 F100DG TYPE 1 MIL STD 2ND TREATMENT RESPONSE | | SURFACE TREATMENT | CADMIUM OR PAINT |
|
|