|
|
|
National Stock Number:
5340-00-521-4713
Federal Supply Class:
5340
National Item Identification Number:
005214713
Description:
BRACKET,ANGLE
Detail:
A ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
|
Manufacturer Information:
| 358139 | 65282 | WHITE MOTOR CORP | | 5214713 | 19207 | U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM | | 5A7462 | 95201 | NAPCO INTERNATIONAL LLC | | 825186 | 16764 | GENERAL MOTORS CORP DELCO REMY DIV | | 825186 | 1LW55 | BORGWARNER PDS (ANDERSON), L.L.C. | | 825186 | 24617 | GENERAL MOTORS CORP |
|
Techincal Specification:
| FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 0.555 INCHES NOMINAL | | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.312 INCHES NOMINAL | | FIRST LEG ANGLE | 90.0 DEGREES NOMINAL | | FIRST LEG LENGTH | 0.500 INCHES NOMINAL | | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.312 INCHES NOMINAL | | FIRST LEG HOLE ARRANGEMENT STYLE | TWO HOLES | | FIRST LEG HOLE DIAMETER | 0.194 INCHES MINIMUM AND 0.198 INCHES MAXIMUM | | FIRST LEG THICKNESS | 0.062 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-633 FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL COMP 1010 | | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.188 INCHES NOMINAL | | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.188 INCHES NOMINAL | | SECOND LEG CORNER RADIUS | 0.125 INCHES NOMINAL | | SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 0.500 INCHES NOMINAL | | SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL | | SECOND LEG STYLE | CORNER RADIUS | | SECOND LEG HOLE ARRANGEMENT STYLE | TWO HOLES | | SECOND LEG HOLE DIAMETER | 0.166 INCHES NOMINAL | | SECOND LEG LENGTH | 0.750 INCHES NOMINAL | | SECOND LEG THICKNESS | 0.062 INCHES NOMINAL | | SECOND LEG WIDTH | 0.875 INCHES NOMINAL | | STYLE DESIGNATOR | ANGLE | | SURFACE TREATMENT | ZINC |
|
|