|
|
|
National Stock Number:
5340-00-521-3267
Federal Supply Class:
5340
National Item Identification Number:
005213267
Description:
BRACKET,DOUBLE ANGLE
Detail:
A rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
|
Manufacturer Information:
| 20-91281-3 | 76301 | THE BOEING COMPANY |
|
Techincal Specification:
| CENTER SECTION THICKNESS | 0.062 INCHES NOMINAL | | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.375 INCHES NOMINAL | | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.375 INCHES NOMINAL | | FIRST LEG END RADIUS | 0.375 INCHES NOMINAL | | FIRST LEG HOLE ARRANGEMENT STYLE | ONE HOLE | | FIRST LEG HOLE DIAMETER | 0.448 INCHES MINIMUM AND 0.458 INCHES MAXIMUM | | FIRST LEG STYLE | END RADIUS | | FIRST LEG THICKNESS | 0.062 INCHES NOMINAL | | FIRST LEG WIDTH | 0.750 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | SAE1010 FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL COMP 1010 | | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.188 INCHES NOMINAL | | SECOND LEG STYLE | END RADIUS AND TAPERED | | SECOND LEG END RADIUS | 0.188 INCHES NOMINAL | | SECOND LEG HOLE ARRANGEMENT STYLE | ONE HOLE | | SECOND LEG HOLE DIAMETER | 0.125 INCHES NOMINAL | | SECOND LEG THICKNESS | 0.062 INCHES NOMINAL | | STYLE DESIGNATOR | DOUBLE ANGLE | | SURFACE TREATMENT | CADMIUM |
|
|