| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.335 INCHES MINIMUM AND 0.415 INCHES MAXIMUM |
| FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG LENGTH | 0.585 INCHES MINIMUM AND 0.665 INCHES MAXIMUM |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.210 INCHES MINIMUM AND 0.290 INCHES MAXIMUM |
| FIRST LEG END RADIUS | 0.275 INCHES MINIMUM AND 0.355 INCHES MAXIMUM |
| FIRST LEG HOLE ARRANGEMENT STYLE | ONE HOLE |
| FIRST LEG HOLE DIAMETER | 0.164 INCHES MINIMUM AND 0.244 INCHES MAXIMUM |
| FIRST LEG STYLE | END RADIUS |
| FIRST LEG THICKNESS | 0.051 INCHES NOMINAL |
| FIRST LEG WIDTH | 0.460 INCHES MINIMUM AND 0.540 INCHES MAXIMUM |
| HEAT TREATMENT | T-3 SOLUTION HEAT TREATED |
| MATERIAL | ALUMINUM ALLOY 2024 OR ALUMINUM ALLOY 5052 |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.710 INCHES MINIMUM AND 0.790 INCHES MAXIMUM |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.210 INCHES MINIMUM AND 0.290 INCHES MAXIMUM |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG STYLE | END RADIUS |
| SECOND LEG END RADIUS | 0.275 INCHES MINIMUM AND 0.355 INCHES MAXIMUM |
| SECOND LEG HOLE ARRANGEMENT STYLE | ONE HOLE |
| SECOND LEG HOLE DIAMETER | 0.237 INCHES MINIMUM AND 0.297 INCHES MAXIMUM |
| SECOND LEG LENGTH | 0.940 INCHES MINIMUM AND 1.000 INCHES MAXIMUM |
| SECOND LEG THICKNESS | 0.051 INCHES NOMINAL |
| SECOND LEG WIDTH | 0.460 INCHES MINIMUM AND 0.540 INCHES MAXIMUM |
| STYLE DESIGNATOR | ANGLE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-5541 MIL SPEC SINGLE TREATMENT RESPONSE |
| SURFACE TREATMENT | CHROMATE |