| FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG LENGTH | 2.312 INCHES NOMINAL |
| FIRST LEG END WIDTH | 1.000 INCHES NOMINAL |
| FIRST LEG STYLE | ANGLE |
| FIRST LEG THICKNESS | 0.125 INCHES NOMINAL |
| FIRST LEG WIDTH | 1.375 INCHES NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-698 FED SPEC SINGLE MATERIAL RESPONSE |
| MATERIAL | STEEL |
| SECOND LEG DISTANCE BETWEEN SECOND AND THIRD HOLE CENTERS ALONG LENGTH | 0.500 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.250 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.375 INCHES NOMINAL |
| SECOND LEG DISTANCE BETWEEN FIRST AND SECOND HOLE CENTERS ALONG LENGTH | 1.250 INCHES NOMINAL |
| SECOND LEG LENGTH | 4.562 INCHES NOMINAL |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG STYLE | ANGLE |
| SECOND LEG END WIDTH | 0.750 INCHES NOMINAL |
| SECOND LEG HOLE DIAMETER | 0.218 INCHES MINIMUM AND 0.225 INCHES MAXIMUM |
| SECOND LEG THICKNESS | 0.125 INCHES NOMINAL |
| SECOND LEG WIDTH | 1.375 INCHES NOMINAL |
| SPECIAL FEATURES | FIRST LEG HAS NOTCH 0.4375 W X 0.9687 DEEP CENTERED ON END AND SECOND LEG THIRD HOLE 0.6875 FROM C/L OF AHLV AND SECOND LEG WIDTH REDUCED TO 1.125 AT 30 DEG ANGLE 2.375 FROM END |
| STYLE DESIGNATOR | ANGLE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-STD-171 FN 1.1.1.2 OR 1.9.1.2 MIL STD SINGLE TREATMENT RESPONSE |
| SURFACE TREATMENT | CADMIUM AND ZINC |