| FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH | 0.040 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.500 INCHES NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| FIRST LEG HOLE DIAMETER | 0.220 INCHES MINIMUM AND 0.233 INCHES MAXIMUM |
| FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 2.000 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.520 INCHES NOMINAL |
| FIRST LEG THICKNESS | 0.091 INCHES NOMINAL |
| FIRST LEG WIDTH | 3.000 INCHES NOMINAL |
| FIRST LEG LENGTH | 1.500 INCHES NOMINAL |
| FIRST LEG STYLE | SQUARE |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/5,ALCLAD T4 FED SPEC SINGLE MATERIAL RESPONSE |
| MATERIAL | ALUMINUM ALLOY 2024 |
| SECOND LEG DISTANCE BETWEEN SECOND AND THIRD HOLE CENTERS ALONG WIDTH | 1.000 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.580 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.460 INCHES NOMINAL |
| SECOND LEG DISTANCE BETWEEN FIRST AND SECOND HOLE CENTERS ALONG WIDTH | 1.000 INCHES NOMINAL |
| SECOND LEG LENGTH | 1.500 INCHES NOMINAL |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG STYLE | SQUARE |
| SECOND LEG HOLE ARRANGEMENT STYLE | THREE HOLES |
| SECOND LEG HOLE DIAMETER | 0.220 INCHES MINIMUM AND 0.233 INCHES MAXIMUM |
| SECOND LEG THICKNESS | 0.091 INCHES NOMINAL |
| SECOND LEG WIDTH | 3.000 INCHES NOMINAL |
| STYLE DESIGNATOR | ANGLE |