| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.250 INCHES MINIMUM AND 0.310 INCHES MAXIMUM |
| FIRST LEG ANGLE | 105.5 DEGREES NOMINAL |
| FIRST LEG LENGTH | 1.250 INCHES MINIMUM AND 1.310 INCHES MAXIMUM |
| FIRST LEG STYLE | END RADIUS AND TAPERED |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.720 INCHES MINIMUM AND 0.780 INCHES MAXIMUM |
| FIRST LEG END RADIUS | 0.250 INCHES MINIMUM AND 0.310 INCHES MAXIMUM |
| FIRST LEG HOLE ARRANGEMENT STYLE | ONE HOLE |
| FIRST LEG HOLE DIAMETER | 0.249 INCHES MINIMUM AND 0.255 INCHES MAXIMUM |
| FIRST LEG THICKNESS | 0.063 INCHES NOMINAL |
| FIRST LEG WIDTH | 1.470 INCHES MINIMUM AND 1.530 INCHES MAXIMUM |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/5,ALCLAD T3 FED SPEC SINGLE MATERIAL RESPONSE |
| MATERIAL | ALUMINUM ALLOY 2024 |
| SECOND LEG CORNER RADIUS | 0.220 INCHES MINIMUM AND 0.280 INCHES MAXIMUM |
| SECOND LEG WIDTH | 1.450 INCHES MINIMUM AND 1.636 INCHES MAXIMUM |
| SECOND LEG LENGTH | 1.450 INCHES MINIMUM AND 1.510 INCHES MAXIMUM |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG THICKNESS | 0.063 INCHES NOMINAL |
| STYLE DESIGNATOR | ANGLE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | BPS FN4357,BELL HELICOPTER CO. MFR REF SINGLE TREATMENT RESPONSE |
| SURFACE TREATMENT | CHROMATE ZINC |