| FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 1.000 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.410 INCHES NOMINAL |
| FIRST LEG ANGLE | 84.0 DEGREES NOMINAL |
| FIRST LEG LENGTH | 1.091 INCHES MINIMUM AND 1.111 INCHES MAXIMUM |
| FIRST LEG STYLE | SQUARE |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.500 INCHES NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| FIRST LEG HOLE DIAMETER | 0.249 INCHES MINIMUM AND 0.255 INCHES MAXIMUM |
| FIRST LEG THICKNESS | 0.125 INCHES NOMINAL |
| FIRST LEG WIDTH | 1.990 INCHES MINIMUM AND 2.010 INCHES MAXIMUM |
| HEAT TREATMENT | T-6 SOLUTION HEAT TREATED |
| MATERIAL | ALUMINUM ALLOY 6061 |
| SECOND LEG THICKNESS | 0.125 INCHES NOMINAL |
| SECOND LEG WIDTH | 1.990 INCHES MINIMUM AND 2.010 INCHES MAXIMUM |
| SECOND LEG LENGTH | 2.322 INCHES MINIMUM AND 2.342 INCHES MAXIMUM |
| SECOND LEG STYLE | SQUARE |
| STYLE DESIGNATOR | ANGLE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-5541 MIL SPEC SINGLE TREATMENT RESPONSE |
| SURFACE TREATMENT | CHROMATE |