| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.750 INCHES NOMINAL |
| FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG LENGTH | 1.570 INCHES NOMINAL |
| FIRST LEG STYLE | END RADIUS |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.750 INCHES NOMINAL |
| FIRST LEG END RADIUS | 0.750 INCHES NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | ONE HOLE |
| FIRST LEG HOLE DIAMETER | 0.053 INCHES NOMINAL |
| FIRST LEG THICKNESS | 0.190 INCHES NOMINAL |
| FIRST LEG WIDTH | 1.500 INCHES NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-13326 CL 90 MIL SPEC SINGLE MATERIAL RESPONSE |
| MATERIAL | STEEL |
| SPECIAL FEATURES | 0.500 RADIUS 120 DEG AT CSSQ |
| SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH | 2.380 INCHES NOMINAL |
| SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 0.120 INCHES NOMINAL |
| SECOND LEG END RADIUS | 0.380 INCHES NOMINAL |
| SECOND LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| SECOND LEG HOLE DIAMETER | 0.377 INCHES MINIMUM AND 0.379 INCHES MAXIMUM |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.380 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.630 INCHES NOMINAL |
| SECOND LEG THICKNESS | 0.190 INCHES NOMINAL |
| SECOND LEG WIDTH | 1.500 INCHES NOMINAL |
| SECOND LEG LENGTH | 5.760 INCHES NOMINAL |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG STYLE | END RADIUS AND TAPERED |
| STYLE DESIGNATOR | ANGLE |
| SURFACE TREATMENT | ENAMEL |