| FIRST LEG DISTANCE BETWEEN UPPER HOLE CENTERS ALONG WIDTH | 1.484 INCHES MINIMUM AND 1.516 INCHES MAXIMUM |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.449 INCHES MINIMUM AND 0.481 INCHES MAXIMUM |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.422 INCHES MINIMUM AND 0.453 INCHES MAXIMUM |
| FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG LENGTH | 1.309 INCHES MINIMUM AND 1.371 INCHES MAXIMUM |
| FIRST LEG STYLE | SQUARE |
| FIRST LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| FIRST LEG HOLE DIAMETER | 0.344 INCHES MINIMUM AND 0.406 INCHES MAXIMUM |
| FIRST LEG THICKNESS | 0.086 INCHES MINIMUM AND 0.094 INCHES MAXIMUM |
| FIRST LEG WIDTH | 2.344 INCHES MINIMUM AND 2.406 INCHES MAXIMUM |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/8 FED SPEC SINGLE MATERIAL RESPONSE |
| MATERIAL | ALUMINUM ALLOY 5052 |
| SECOND LEG THICKNESS | 0.086 INCHES MINIMUM AND 0.094 INCHES MAXIMUM |
| SECOND LEG WIDTH | 2.344 INCHES MINIMUM AND 2.406 INCHES MAXIMUM |
| SECOND LEG LENGTH | 3.031 INCHES MINIMUM AND 3.094 INCHES MAXIMUM |
| SECOND LEG STYLE | SQUARE |
| STYLE DESIGNATOR | ANGLE |
| SURFACE TREATMENT | ENAMEL |