| FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 1.240 INCHES MINIMUM AND 1.260 INCHES MAXIMUM |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.305 INCHES MINIMUM AND 0.410 INCHES MAXIMUM |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.345 INCHES MINIMUM AND 0.405 INCHES MAXIMUM |
| FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG LENGTH | 0.970 INCHES MINIMUM AND 1.030 INCHES MAXIMUM |
| FIRST LEG THICKNESS | 0.010 INCHES MINIMUM AND 0.160 INCHES MAXIMUM |
| FIRST LEG STYLE | SQUARE AND TAPERED |
| FIRST LEG END WIDTH | 1.530 INCHES MINIMUM AND 1.539 INCHES MAXIMUM |
| FIRST LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| FIRST LEG HOLE DIAMETER | 0.280 INCHES MINIMUM AND 0.287 INCHES MAXIMUM |
| FIRST LEG WIDTH | 1.970 INCHES MINIMUM AND 2.030 INCHES MAXIMUM |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-200/3 FED SPEC SINGLE MATERIAL RESPONSE |
| MATERIAL | ALUMINUM ALLOY 2024 |
| SECOND LEG END WIDTH | 1.470 INCHES MINIMUM AND 1.530 INCHES MAXIMUM |
| SECOND LEG HOLE ARRANGEMENT STYLE | ONE SLOT |
| SECOND LEG LENGTH | 0.720 INCHES MINIMUM AND 0.780 INCHES MAXIMUM |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.290 INCHES MINIMUM AND 0.350 INCHES MAXIMUM |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.970 INCHES MINIMUM AND 1.030 INCHES MAXIMUM |
| SECOND LEG THICKNESS | 0.100 INCHES MINIMUM AND 0.160 INCHES MAXIMUM |
| SECOND LEG WIDTH | 1.970 INCHES MINIMUM AND 2.030 INCHES MAXIMUM |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG SLOT LENGTH | 1.370 INCHES MINIMUM AND 1.430 INCHES MAXIMUM |
| SECOND LEG SLOT WIDTH | 0.350 INCHES MINIMUM AND 0.410 INCHES MAXIMUM |
| SECOND LEG STYLE | SQUARE AND TAPERED |
| STYLE DESIGNATOR | ANGLE |
| SURFACE TREATMENT | PAINT |