|
|
|
National Stock Number:
5340-00-456-6059
Federal Supply Class:
5340
National Item Identification Number:
004566059
Description:
BRACKET,DOUBLE ANGLE
Detail:
A rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
|
Manufacturer Information:
| 209-075-264-13 | 97499 | BELL TEXTRON INC |
|
Techincal Specification:
| FABRICATION METHOD | FORMED | | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.370 INCHES NOMINAL | | FIRST LEG HOLE ARRANGEMENT STYLE | ONE HOLE | | FIRST LEG HOLE DIAMETER | 0.190 INCHES MINIMUM AND 0.196 INCHES MAXIMUM | | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.380 INCHES NOMINAL | | FIRST LEG STYLE | CORNER RADIUS | | FIRST LEG WIDTH | 0.740 INCHES NOMINAL | | SPECIAL FEATURES | 2 HOLES,0.208/0.214 IN. DIA,1.125 IN. BETWEEN CENTERS ALONG W,LOCATED IN CENTER SECTION | | SECOND LEG CORNER RADIUS | 0.310 INCHES NOMINAL | | SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 1.125 INCHES NOMINAL | | SECOND LEG HOLE ARRANGEMENT STYLE | TWO HOLES | | SECOND LEG HOLE DIAMETER | 0.146 INCHES MINIMUM AND 0.152 INCHES MAXIMUM | | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.280 INCHES NOMINAL | | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.250 INCHES NOMINAL | | SECOND LEG WIDTH | 1.620 INCHES NOMINAL | | SECOND LEG STYLE | CORNER RADIUS |
|
|