| CENTER SECTION HEIGHT | 0.410 INCHES MINIMUM AND 0.430 INCHES MAXIMUM |
| CENTER SECTION THICKNESS | 0.056 INCHES MINIMUM AND 0.068 INCHES MAXIMUM |
| CENTER SECTION WIDTH | 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM |
| FABRICATION METHOD | STAMPED |
| FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.250 INCHES NOMINAL |
| FIRST LEG END RADIUS | 0.469 INCHES MINIMUM AND 0.531 INCHES MAXIMUM |
| FIRST LEG HOLE ARRANGEMENT STYLE | ONE HOLE |
| FIRST LEG HOLE DIAMETER | 0.200 INCHES MINIMUM AND 0.210 INCHES MAXIMUM |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.195 INCHES MINIMUM AND 0.205 INCHES MAXIMUM |
| FIRST LEG STYLE | END RADIUS |
| FIRST LEG THICKNESS | 0.056 INCHES MINIMUM AND 0.058 INCHES MAXIMUM |
| FIRST LEG WIDTH | 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM |
| FIRST LEG LENGTH | 0.741 INCHES MINIMUM AND 0.783 INCHES MAXIMUM |
| FSC APPLICATION DATA | JET ENGINE,AIRCRAFT |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5510 ASSN STD SINGLE MATERIAL RESPONSE |
| MATERIAL | STEEL COMP 321 |
| MOUNTING HOLE TYPE | PLAIN |
| SECOND LEG ANGLE | 90.0 DEGREES NOMINAL |
| SECOND LEG LENGTH | 0.997 INCHES MINIMUM AND 1.027 INCHES MAXIMUM |
| SECOND LEG THICKNESS | 0.056 INCHES MINIMUM AND 0.058 INCHES MAXIMUM |
| SECOND LEG RELATIONSHIP TO FIRST LEG | IDENTICAL |
| STYLE DESIGNATOR | DOUBLE ANGLE |