| ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG DISTANCE BETWEEN UPPER HOLE CENTERS ALONG WIDTH | 0.359 INCHES MINIMUM AND 0.370 INCHES MAXIMUM |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.183 INCHES NOMINAL |
| FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH | 1.500 INCHES NOMINAL |
| FIRST LEG LENGTH | 2.500 INCHES NOMINAL |
| FIRST LEG STYLE | SQUARE |
| FIRST LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250 FED SPEC ALL MATERIAL RESPONSES |
| MATERIAL THICKNESS | 0.359 INCHES MINIMUM AND 0.370 INCHES MAXIMUM |
| MATERIAL | ALUMINUM ALLOY 7075 |
| MOUNTING HOLE TYPE | THREADED |
| SECOND LEG LENGTH | 6.935 INCHES NOMINAL |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG STYLE | SQUARE |
| SECOND LEG WIDTH | 0.359 INCHES MINIMUM AND 0.370 INCHES MAXIMUM |
| STYLE DESIGNATOR | ANGLE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-STD-171 MIL STD ALL TREATMENT RESPONSES |
| SURFACE TREATMENT | ANODIZE |
| SPECIAL FEATURES | THREADED HOLE AT TOP OF SECOND LEG 6-32 UNC-2B.OPEN SLOT BETWEEN HOLES ON FIRST LEG 0.183 IN W;.5 IN. L |