| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.100 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.062 INCHES NOMINAL |
| FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG CORNER RADIUS | 0.100 INCHES MINIMUM AND 0.160 INCHES MAXIMUM |
| FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 0.260 INCHES NOMINAL |
| FIRST LEG STYLE | CORNER RADIUS |
| FIRST LEG THICKNESS | 0.020 INCHES NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| FIRST LEG HOLE DIAMETER | 0.035 INCHES MINIMUM AND 0.045 INCHES MAXIMUM |
| FIRST LEG LENGTH | 0.170 INCHES MINIMUM AND 0.230 INCHES MAXIMUM |
| FIRST LEG WIDTH | 0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-766,COND A,FINISH NO 1 FED SPEC SINGLE MATERIAL RESPONSE |
| MATERIAL | STEEL COMP 304 |
| SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH | 8.935 INCHES MINIMUM AND 8.945 INCHES MAXIMUM |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.215 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.178 INCHES MINIMUM AND 0.198 INCHES MAXIMUM |
| SECOND LEG LENGTH | 9.400 INCHES MINIMUM AND 9.460 INCHES MAXIMUM |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| SECOND LEG HOLE DIAMETER | 0.209 INCHES MINIMUM AND 0.229 INCHES MAXIMUM |
| SECOND LEG STYLE | SQUARE |
| SECOND LEG THICKNESS | 0.020 INCHES NOMINAL |
| SECOND LEG WIDTH | 0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM |
| STYLE DESIGNATOR | ANGLE |