| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.234 INCHES MINIMUM AND 0.266 INCHES MAXIMUM |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.234 INCHES MINIMUM AND 0.266 INCHES MAXIMUM |
| FIRST LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| FIRST LEG ANGLE | 95.0 DEGREES NOMINAL |
| FIRST LEG CORNER RADIUS | 0.234 INCHES MINIMUM AND 0.266 INCHES MAXIMUM |
| FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 0.624 INCHES NOMINAL |
| FIRST LEG THICKNESS | 0.071 INCHES MINIMUM AND 0.078 INCHES MAXIMUM |
| FIRST LEG HOLE DIAMETER | 0.216 INCHES MINIMUM AND 0.220 INCHES MAXIMUM |
| FIRST LEG LENGTH | 0.767 INCHES MINIMUM AND 0.799 INCHES MAXIMUM |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 4911 ASSN STD SINGLE MATERIAL RESPONSE |
| MATERIAL | TITANIUM ALLOY |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.300 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.455 INCHES MINIMUM AND 0.475 INCHES MAXIMUM |
| SECOND LEG HOLE ARRANGEMENT STYLE | ONE SLOT |
| SECOND LEG CORNER RADIUS | 0.109 INCHES MINIMUM AND 0.141 INCHES MAXIMUM |
| SECOND LEG SLOT LENGTH | 0.500 INCHES MINIMUM AND 0.520 INCHES MAXIMUM |
| SECOND LEG SLOT WIDTH | 0.230 INCHES MINIMUM AND 0.250 INCHES MAXIMUM |
| SECOND LEG STYLE | CORNER RADIUS |
| SECOND LEG THICKNESS | 0.071 INCHES MINIMUM AND 0.078 INCHES MAXIMUM |
| SECOND LEG LENGTH | 0.900 INCHES NOMINAL |
| SECOND LEG WIDTH | 0.920 INCHES MINIMUM AND 0.940 INCHES MAXIMUM |
| STYLE DESIGNATOR | ANGLE |