|
|
|
National Stock Number:
5340-00-425-1380
Federal Supply Class:
5340
National Item Identification Number:
004251380
Description:
CLIP,SPRING TENSION
Detail:
A preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
|
Manufacturer Information:
| M24066-4-115 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | M24066/4-115 | 80205 | NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE | | NASM24066/4 | 80205 | NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE | | MILC24066-4 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | M24066/4-115 | D9182 | ZF INDUSTRIEANTRIEBE WITTEN GMBH |
|
Techincal Specification:
| MATERIAL | STEEL OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A682 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM AND | | CHROMATE OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | HOLE DIAMETER | 0.141 INCHES MINIMUM AND | | 0.147 INCHES MAXIMUM | | WIDTH | 1.990 INCHES MINIMUM AND | | 2.010 INCHES MAXIMUM | | OVERALL HEIGHT | 0.900 INCHES MINIMUM AND | | 0.904 INCHES MAXIMUM | | MATERIAL THICKNESS | 0.025 INCHES MINIMUM AND | | 0.031 INCHES MAXIMUM | | LENGTH | 0.790 INCHES MINIMUM AND | | 0.830 INCHES MAXIMUM | | DISTANCE FROM LOOP CENTER TO END | 0.470 INCHES MINIMUM | | LOOP/HOLDING DIMENSION | 0.740 INCHES MINIMUM AND | | 0.760 INCHES MAXIMUM | | MOUNTING METHOD | UNTHREADED HOLE |
|
|