|
|
|
National Stock Number:
5331-00-455-6406
Federal Supply Class:
5331
National Item Identification Number:
004556406
Description:
O-RING
Detail:
A nonmetallic circular item with an aperature, having a solid round cross-section. They are used primarily for sealing. For items with other than round cross section, see PACKING,PREFORMED. For noncircular items with a round cross-section, see SEAL,NONMETALLIC ROUND SECTION and RUBBER,ROUND SECTION.
|
Manufacturer Information:
| 2-032 N219-7 | 02697 | PARKER-HANNIFIN CORP | | 2-032 N674-7 | 02697 | PARKER-HANNIFIN CORP | | 2243009-8 | 02697 | PARKER-HANNIFIN CORP | | 2443009-8 | 11314 | HUTCHINSON SEAL CORP | | 2243009-8 | 25184 | PARKER HANNIFIN CORPORATION DIV O-RING DIVISION | | 2243009-8 | 95272 | STILLMAN SEAL CORPORATION | | 2574737-8 | 02697 | PARKER-HANNIFIN CORP | | N0674 0186-4070ITAR | 02697 | PARKER-HANNIFIN CORP | | 2574737-8 | 10001 | NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER | | 2443009-8 | 24664 | JONAL LABORATORIES INC | | N0674 0186-4070ITAR | 25184 | PARKER HANNIFIN CORPORATION DIV O-RING DIVISION | | 47.34X1.78 20A7 | F8226 | SOCIETE TECHNIQUE ARMORICAINE DECAOUTCHOUC ET ELASTOMERES MANUFACTU |
|
Techincal Specification:
| CENTER HOLE DIAMETER | 1.854 INCHES MINIMUM AND 1.874 INCHES MAXIMUM | | CROSS-SECTIONAL HEIGHT | 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM | | MATERIAL | RUBBER | | PART NAME ASSIGNED BY CONTROLLING AGENCY | PACKING, PREFORMED | | SPECIAL FEATURES | RUBBER 70 DUROMETER I/A/W ASTM D735-581 SB715 BE, F (FOR F, USE TEST METHOD ASTM D736) EXCEPT THAT MATERIAL PROPRIETARY CHANGES FOLLOWING | | SUPPLEMENTARY FEATURES | IMMERSIAN IN OIL SAE 30, NON-DETERGENT, FOR 70 HOURS AT 212 DEGREES FAHRENHEIT SHALL NOT EXCEED THE FOLLOWING: TENSILE STRENGTH: 20%; ELONGATION: 25; VOLUME CHANGE: 3%; HARDNESS CHANGE: 6 POINTS DUROMETER |
|
|