|
|
|
National Stock Number:
5330-00-517-0159
Federal Supply Class:
5330
National Item Identification Number:
005170159
Description:
RING,WIPER
Detail:
A CIRCULAR, SINGLE OR MULTIPIECE, RIGID, METALLIC OR NONMETALLIC ITEM HAVING A CENTRALLY LOCATED HOLE WITH A SHARP EDGE ON THE INSIDE PERIPHERY. IT IS SUPPLIED IN VARIOUS CROSS-SECTIONAL SHAPES AND IS DESIGNED TO BE INSTALLED IN A CYLINDER, SHOCK STRUT, OR SIMILAR DEVICE TO REMOVE EXCESS OIL, DIRT, ICE, AND/OR FOREIGN MATERIAL FROM A PISTON, RAM, OR SLIDING ROD. EXCLUDES PACKING, PREFORMED; RING, PISTON; AND SEAL RING, METAL.
|
Manufacturer Information:
| 0AS-4 | 26303 | GREENE TWEED AND CO ADVANTEC DIV | | 981843 | F0302 | SAFRAN TRANSMISSION SYSTEMS | | AN6231A4 | 88044 | AERONAUTICAL STANDARDS GROUP DEPT OF NAVY AND AIR FORCE | | DRI-4 | 30438 | DELTA MFG AND SALES INC | | FWR-3C-4 | 83908 | ACE PRODUCTS CO OF TOLEDO INC | | G-4 | 72637 | GAYLE GEORGE W AND SON | | GI 1171-4 | 96679 | GAD-JETS INC | | ISR-4 | 95725 | INDUSTRIAL SUPPLIES | | MIL-R-5049 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MIL-S-5049 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MS28776M2-4 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | OAS-4 | 26303 | GREENE TWEED AND CO ADVANTEC DIV | | SRC-4 | 25942 | SCRAPPER RINGS CO DIV OF ROBERTS TOOL CO |
|
Techincal Specification:
| CROSS-SECTIONAL SHAPE STYLE | OUTSIDE GROOVED, STRAIGHT FACE | | FSC APPLICATION DATA | HYDRAULIC SYSTEM,ACFT | | INSIDE DIAMETER | 0.688 INCHES NOMINAL | | JOINT STYLE | DIAGONAL JOINT | | OUTER EDGE THICKNESS | 0.094 INCHES NOMINAL | | OUTSIDE DIAMETER | 0.928 INCHES NOMINAL | | MATERIAL THICKNESS | 0.125 INCHES NOMINAL | | RING STYLE | CONCENTRIC | | TEST DATA DOCUMENT | 81349-MIL-S-5049 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
|
|