|
|
|
National Stock Number:
5330-00-513-7283
Federal Supply Class:
5330
National Item Identification Number:
005137283
Description:
SEAL,NONMETALLIC SPECIAL SHAPED
Detail:
An item fabricated from NONMETALLIC SPECIAL SHAPED SECTION. It may be (1) formed to a specific shape with or without joints, (2) a single piece whose ends have been secured together to form a specific shape, or (3) a straight item fabricated to a specific length for a specific application with end cuts or joints. Items, except for molded corners, slot(s), press fit buttons, and the like must be of one continuous cross section. It is specifically designed for use in applications where there is no relative motion between joined parts. Excludes BUSHING, NONMETALLIC; PACKING, PERFORMED; PAD, CUSHIONING;and SEAL, PLAIN. For straight items with square end cuts and without mounting hole(s), slot(s), or press fit buttons, see NONMETALLIC SPECIAL SHAPED SECTION.
|
Manufacturer Information:
| 1287306 | 10001 | NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER |
|
Techincal Specification:
| APERTURE WIDTH | 15.375 INCHES NOMINAL | | APERTURE LENGTH | 21.750 INCHES NOMINAL | | ATTACHMENT FEATURE QUANTITY | 20 | | ATTACHMENT HOLE DIAMETER | 0.203 INCHES NOMINAL | | ATTACHMENT METHOD | ROUND HOLE | | CONSTRUCTION | SOLID | | CROSS-SECTIONAL SHAPE STYLE | SOLID BULB OFF SET | | CROSS-SECTIONAL THICKNESS | 0.050 INCHES MINIMUM AND 0.070 INCHES MAXIMUM | | CROSS-SECTIONAL HEIGHT | 0.120 INCHES MINIMUM AND 0.140 INCHES MAXIMUM | | CROSS-SECTIONAL WIDTH | 0.562 INCHES NOMINAL | | FABRICATION METHOD | SOLID | | INSIDE CORNER BEVEL LENGTH | 0.219 INCHES NOMINAL | | MATERIAL | RUBBER CHLOROPRENE CLASS CR OVERALL | | OFFSET DISTANCE | 0.035 INCHES NOMINAL | | STYLE DESIGNATOR | NON-CIRCULAR |
|
|