|
|
|
National Stock Number:
5330-00-008-2130
Federal Supply Class:
5330
National Item Identification Number:
000082130
Description:
GASKET
Detail:
A deformable material which prevents the passage of matter through the joint formed when two faces are joined. It may be metallic or nonmetallic, lubricated or impregnated, solid or hollow cross section. It may be made to any predetermined dimension and shape. Excludes flat disks, items made of felt material and items having joints. For round metal and plastic items with an aperture and a solid rectangular cross section, see WASHER, FLAT; SHIM; BEARING, WASHER, THRUST; and SPACER RING. Excludes DISK, VALVE; SEAL, NONMETALLIC ANGLE; SEAL, NONMETALLIC CHANNEL; SEAL, NONMETALLIC SPECIAL SHAPED SECTION; SHIELDING GASKET, ELECTRONIC; and RING, SEALING JAR.
|
Manufacturer Information:
| EL21442-1PC54 | 66850 | PENTAIR VALVES & CONTROLS US LP DIV PENTAIR FLOW CONTROL | | MIL-G-1149C | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| ELONGATION PERCENTAGE | 300 MAXIMUM | | MATERIAL | RUBBER CHLOROPRENE CLASS CR OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-G-1149,TY 1,CL 2 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL | | HARDNESS RATING | 45.0 SHORE DUROMETER A MINIMUM AND | | 55.0 SHORE DUROMETER A MAXIMUM OVERALL | | CROSS-SECTIONAL SHAPE STYLE | SOLID SINGLE OR COMPOSITION | | CROSS-SECTIONAL THICKNESS | 0.031 INCHES NOMINAL | | STYLE DESIGNATOR | CIRCULAR | | OUTSIDE DIAMETER | 0.438 INCHES NOMINAL | | APERTURE DIAMETER | 0.125 INCHES NOMINAL | | TEST DATA DOCUMENT | 81349-MIL-P-23199 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). | | SPECIAL TEST FEATURES | SPECIAL QUALITY CONTROL TESTING | | REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS | AS DIFFERENTIATED BY MATERIAL WHICH MUST CONFORM TO SHIPS PARTS CONTROL CENTER SPECIAL QUALITY CONTROL PROVISIONS | | SPEC/STD CONTROLLING DATA | | | MANUFACTURERS CODE | 81349 | | NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE | MIL-G-1149C | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 66850 | | DESIGN CONTROL REFERENCE | EL21442-1PC54 |
|
|