| CRITICALITY CODE JUSTIFICATION | AAZG AND AAZE AND AATB |
| COUNTERSINK ANGLE | 100.0 DEGREES NOMINAL |
| FASTENER LENGTH | 0.427 INCHES MINIMUM AND 0.447 INCHES MAXIMUM |
| GRIP LENGTH | 0.120 INCHES MINIMUM AND 0.130 INCHES MAXIMUM |
| HEAD STYLE | FLUSH COUNTERSUNK |
| HEAD MAJOR DIAMETER | 0.2874 INCHES MINIMUM AND 0.2922 INCHES MAXIMUM |
| HEAT TREATMENT | T-6 SOLUTION HEAT TREATED OVERALL |
| LUBRICATION | CETYL ALCOHOL |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-430 FED SPEC 1ST MATERIAL RESPONSE OR QQ-A-225/9 FED SPEC 2ND MATERIAL RESPONSE OVERALL |
| MATERIAL | ALUMINUM ALLOY 7075 OVERALL |
| NOMINAL THREAD SIZE | 0.190 INCHES |
| SHANK DIAMETER | 0.1625 INCHES MINIMUM AND 0.1635 INCHES MAXIMUM |
| SHANK STYLE | PIN-RIVET, STRAIGHT, THREADED |
| SHEAR STRENGTH | 1760 DOUBLE POUNDS PER SQUARE INCH |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-A-8625 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |
| SURFACE TREATMENT | ANODIZE OVERALL |
| THREAD CLASS | 3A |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD QUANTITY PER INCH | 32 |
| THREAD SERIES DESIGNATOR | UNJC |
| WIDTH BETWEEN FLATS | 0.0635 INCHES MINIMUM AND 0.0645 INCHES MAXIMUM |