| COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| EXPANSION DEVICE | SERRATED STEM-TYPE W |
| FASTENER LENGTH | 1.538 INCHES MINIMUM AND 1.568 INCHES MAXIMUM |
| GRIP LENGTH | 1.344 INCHES MINIMUM AND 1.407 INCHES MAXIMUM |
| HARDNESS RATING | 32.0 ROCKWELL C MINIMUM SLEEVE AND 40.0 ROCKWELL C MAXIMUM SLEEVE |
| HARDNESS RATING | 48.0 ROCKWELL C MINIMUM STEM AND 53.0 ROCKWELL C MAXIMUM STEM |
| HEAD STYLE | FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER) |
| HEAD MAJOR DIAMETER | 0.386 INCHES MAXIMUM |
| MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A547 ASSN STD 1ST MATERIAL RESPONSE SLEEVE OR 66 FED STD 2ND MATERIAL RESPONSE SLEEVE OR MIL-S-6758 MIL SPEC 3RD MATERIAL RESPONSE SLEEVE OR 66 FED STD 3RD MATERIAL RESPONSE SLEEVE |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-6049 MIL SPEC SINGLE MATERIAL RESPONSE STEM OR ASTM A547 ASSN STD SINGLE MATERIAL RESPONSE STEM |
| MATERIAL | STEEL COMP 4037 SLEEVE OR STEEL COMP 4027 SLEEVE OR STEEL COMP 4130 SLEEVE |
| MATERIAL | STEEL COMP 8740 STEM |
| SHANK DIAMETER | 0.197 INCHES MINIMUM AND 0.199 INCHES MAXIMUM |
| SHANK STYLE | SELF-PLUGGING MECHANICALLY LOCKED STEM |
| SHEAR STRENGTH | 3450 SINGLE POUNDS PER SQUARE INCH |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE SLEEVE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 1,CL 3 FED SPEC SINGLE TREATMENT RESPONSE STEM |
| SURFACE TREATMENT | CADMIUM SLEEVE AND CHROMATE SLEEVE |
| SURFACE TREATMENT | CADMIUM STEM |