| EFFECTIVE LENGTH | 1.531 INCHES MINIMUM AND 1.551 INCHES MAXIMUM |
| DIAMETER | 0.8105 INCHES MINIMUM AND 0.8125 INCHES MAXIMUM |
| FIRST END LOCATION | BOTH ENDS |
| FIRST HOLE DIAMETER | 0.115 INCHES MINIMUM AND 0.135 INCHES MAXIMUM |
| FIRST END STYLE | CHAMFERED |
| FIRST END TAPER ANGLE | 40.0 DEGREES MINIMUM AND 50.0 DEGREES MAXIMUM |
| FIRST END TAPER LENGTH | 0.021 INCHES MINIMUM AND 0.041 INCHES MAXIMUM |
| HOLE ARRANGEMENT STYLE | DRILLED THRU CENTER |
| OVERALL LENGTH | 1.990 INCHES MINIMUM AND 2.010 INCHES MAXIMUM |
| MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A400-69,CLASS C2 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| MATERIAL | STEEL OVERALL |
| SPECIAL FEATURES | 3/8-16 UNC THD HOLE 1/2 IN.DEEP IN GROOVED END,1/8 IN.DIA HOLE 1-1/16 IN.DEEP IN OTHER END |
| SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL |
| STYLE DESIGNATOR | GROOVE |
| SURFACE FINISH | 125.0 MICROINCHES BOTH ENDS |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| SURFACE TREATMENT | CADMIUM OVERALL |
| UNDERCUT DIAMETER | 0.677 INCHES MINIMUM AND 0.697 INCHES MAXIMUM |
| UNDERCUT WIDTH | 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM |