|
|
|
National Stock Number:
5315-00-571-2487
Federal Supply Class:
5315
National Item Identification Number:
005712487
Description:
PIN,GROOVED,HEADED
Detail:
A CYLINDRICALLY-SHAPED HEADED ITEM, HAVING CIRCULAR OR LONGITUDINAL GROOVE(S).
|
Manufacturer Information:
| 8167008 | 18876 | U S ARMY AVIATION AND MISSILE COMMAND |
|
Techincal Specification:
| FIRST END STYLE | CHAMFERED | | MATERIAL | STEEL OVERALL | | STYLE DESIGNATOR | GROOVE | | MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A400-9 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | ZINC OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-Z-325,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | DIAMETER | 0.495 INCHES MINIMUM AND | | 0.500 INCHES MAXIMUM | | EFFECTIVE LENGTH | 1.034 INCHES NOMINAL | | UNDERCUT DIAMETER | 0.472 INCHES MINIMUM AND | | 0.476 INCHES MAXIMUM | | UNDER HEAD LENGTH | 1.178 INCHES MINIMUM AND | | 1.198 INCHES MAXIMUM | | UNDERCUT WIDTH | 0.039 INCHES MINIMUM AND | | 0.042 INCHES MAXIMUM | | FIRST END TAPER LENGTH | 0.021 INCHES MINIMUM AND | | 0.041 INCHES MAXIMUM | | FIRST END TAPER ANGLE | 44.5 DEGREES MINIMUM AND | | 45.5 DEGREES MAXIMUM | | HOLE ARRANGEMENT STYLE | DRILLED THRU HEAD | | FIRST HOLE DIAMETER | 0.531 INCHES MINIMUM AND | | 0.547 INCHES MAXIMUM | | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 1.678 INCHES MINIMUM AND | | 1.698 INCHES MAXIMUM | | SURFACE FINISH | 125.0 MICROINCHES OVERALL |
|
|