|
|
|
National Stock Number:
5315-00-559-0323
Federal Supply Class:
5315
National Item Identification Number:
005590323
Description:
PIN,STRAIGHT,HEADED
Detail:
A headed, cylindrically-shaped item having a solid shank for fitting into corresponding holes, used for aligning or fastening. It may have welding projections. It also may contain holes drilled perpendicular to axial centerline. Excludes PIN, ECCENTRIC.
|
Manufacturer Information:
| AN121665 | 88044 | AERONAUTICAL STANDARDS GROUP DEPT OF NAVY AND AIR FORCE |
|
Techincal Specification:
| UNDER HEAD LENGTH | 1.209 INCHES MINIMUM AND | | 1.229 INCHES MAXIMUM | | DIAMETER | 0.184 INCHES MINIMUM AND | | 0.186 INCHES MAXIMUM | | HEAD STYLE | FLAT | | STYLE DESIGNATOR | STRAIGHT | | MATERIAL | STEEL COMP 8740 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 6322 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | AMS 2400 ASSN STD SINGLE TREATMENT RESPONSE OVERALL | | HARDNESS RATING | 26.0 ROCKWELL C MINIMUM AND | | 32.0 ROCKWELL C MAXIMUM OVERALL | | CHAMFER LENGTH | 0.037 INCHES MINIMUM AND | | 0.057 INCHES MAXIMUM | | PIN CHAMFER ANGLE | 10.0 DEGREES MINIMUM AND | | 20.0 DEGREES MAXIMUM | | PIN HEAD DIAMETER | 0.312 INCHES NOMINAL | | HEIGHT | 0.037 INCHES MINIMUM AND | | 0.057 INCHES MAXIMUM | | HOLE ARRANGEMENT STYLE | ONE END DRILLED | | FIRST HOLE DIAMETER | 0.065 INCHES MINIMUM AND | | 0.072 INCHES MAXIMUM | | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.071 INCHES MINIMUM AND | | 0.111 INCHES MAXIMUM | | SURFACE FINISH | 63.0 MICROINCHES HEAD BEARING SURFACE | | SPEC/STD CONTROLLING DATA | | | MANUFACTURERS CODE | 88044 | | DEFINITIVE GOVERNMENT SPEC/STD REFERENCE | AN121665 |
|
|