|
|
|
National Stock Number:
5315-00-558-9644
Federal Supply Class:
5315
National Item Identification Number:
005589644
Description:
PIN,STRAIGHT,HEADLESS
Detail:
A headless, cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 MM); for items whose length exceeds twelve inches (304 MM); see ROD, STRAIGHT, HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN, STRAIGHT, THREADED.
|
Manufacturer Information:
| 102248 | 01413 | AIR LOGISTICS CORPORATION |
|
Techincal Specification:
| MATERIAL | STEEL COMP 4130 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-6758 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM AND | | CHROMATE OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 2,CL 1 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | FIRST END STYLE | CHAMFERED | | FIRST END TAPER LENGTH | 0.020 INCHES MINIMUM AND | | 0.100 INCHES MAXIMUM | | FIRST END TAPER ANGLE | 44.5 DEGREES MINIMUM AND | | 45.5 DEGREES MAXIMUM | | SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL | | HOLE ARRANGEMENT STYLE | BOTH END DRILLED | | FIRST HOLE DIAMETER | 0.141 INCHES MINIMUM AND | | 0.151 INCHES MAXIMUM | | SECOND HOLE DIAMETER | 0.141 INCHES MINIMUM AND | | 0.151 INCHES MAXIMUM | | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.340 INCHES MINIMUM AND | | 0.420 INCHES MAXIMUM | | CENTER TO CENTER DISTANCE BETWEEN HOLES | 1.960 INCHES MINIMUM AND | | 2.040 INCHES MAXIMUM | | SURFACE FINISH | 125.0 MICROINCHES OVERALL | | PIN OVERALL LENGTH | 2.720 INCHES MINIMUM AND | | 2.800 INCHES MAXIMUM | | PIN OVERALL DIAMETER | 0.7450 INCHES MINIMUM AND | | 0.7470 INCHES MAXIMUM | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 01413 | | DESIGN CONTROL REFERENCE | 102248 |
|
|